To save data from RAID or NAS servers, you need not only knowledge of RAID levels but also expert knowledge of individual data structures. Data recovery from RAID and NAS systems involves not only logical but also physical data rescue from the HDD RAID field.
We are specialized in the wishes and requirements of small and medium businesses that have suffered a loss of data on the RAID server. As part of RAID data rescue, our Raid recovery company saves data from all manufacturers’ systems.
Before we start rescue data from a RAID or NAS field, we will diagnose it. After analysis, we determine an approximate price range. The cost of rescue data from RAID depends on several factors:
- The number of HDDs in the RAID array
- Type and severity of the damage
- The type of RAID array selected
Smaller RAID configurations consisting of a 2 x 1 TB HDD comprised in a RAID 0 Array in which one of the disks is physically damaged are simple cases. We work exclusively on bit physical disk copies and never performs data rescue on origin data carriers.
Despite the protection against data loss, in some cases, the RAID server may suddenly fail. Reasons may be any, but in general, the RAID array is not a guarantee of stability and security.
Data recovery from RAID and servers has long been our successful domain. We have succeeded in saving dozens of RAID fields; we have dedicated RAID rescue specialist company.
We successfully saved data from various RAID configurations not only from well-known names such as Hewlett-Packard (HP), Dell or IBM but also less well-known manufacturers and brands. Our specialists meet the conditions to 100 percent.
At present, data is increasingly being stored on NAS / SAN boxes. These devices have the ability to create RAID 0 or RAID 1 fields for 2 drives, but they can be expanded to RAID 5, RAID 10 or RAID 50-based solutions.
In case of a NAS or SAN disorder, it is very irresponsible to rely on Rebuild. In general, we recommend that you contact our data recovery company immediately after the data is lost and the server is unavailable.
Even if the Rebuild RAID field fails, it is technically very complicated, even impossible to recover data. In the event of data loss on the RAID server, it is important to learn more about our data rescue company.